|
Please refer to Services Offered for basic details on each service, or the article, Race Tuning the Lever-Action Rifle, for a thorough discussion of this work. |
|
Your Name & Address (please print clearly!)
Name: _______________________________ Street Address: _______________________ City, State: ___________________________ Zip Code: ___________ |
Rifle Description
Rifle Make & Model: ________________ Rifle Serial Number: ________________ |
|
Telephone Number:__________________ (Optional, in
case I need to discuss something with you, to speed service.) E-mail Address: ____________________ (Optional, if available, this will help ease the task of discussing the work.) |
|
If Action Tuning & Stock Bedding
is Desired (circle one only)
Part 1:
Marlin:
$100, plus return shipping and insurance cost
Winchester and replicas:
$125, plus return shipping and insurance cost.
A+B (basic tuning plus stock bedding)
Marlin:
$200, plus return shipping and insurance cost
Winchester and replicas:
$225, plus return shipping and insurance cost
A+B+C (basic tuning + stock bedding + buttstock throughbolt)
Marlin:
$275, plus return shipping and insurance cost
Winchester and replicas:
$300, plus return shipping and insurance cost
A+B+C+D1 (basic tuning + stock bedding + buttstock throughbolt + Robar NP3 plate
all moving action parts)
Marlin:
$575, plus return shipping and insurance cost
Winchester and replicas:
$625, plus return shipping and insurance cost
A+B+C+D2 (basic tuning + stock bedding + buttstock throughbolt + Robar NP3 plate
entire gun, other than bore interior)
Marlin:
$800, plus return shipping and insurance cost
Winchester and replicas:
$850, plus return shipping and insurance cost
Action Lengthening (circle one only)
Part 2:
AL 1a, Marlin 336 to 2.68":
$125, plus return shipping and insurance cost
AL 1b, Marlin 336 to 2.73":
$250, plus return shipping and insurance cost
AL 2a, Marlin 1894 to 1.65":
$100, plus return shipping and insurance cost
AL 2b, Marlin 1894 to 1.73":
$250, plus return shipping and insurance cost
AL 3, Browning M92 & M94 based guns lengthened as much as is feasible:
$275, plus return shipping and insurance cost
Hammer Spring Reduction
Part 3:
HSR:
$125, plus return shipping and insurance cost
(Service only applicable to guns not having rebounding hammers or hammer block
mechanisms, see Services Offered page.)
Recoil Pad Installation (cost & work separate from above packages)
Part 4: Package RPI:
Any action with a two-piece stock, adjust LOP, install Kick Eese recoil pad and
refinish wood with hand-rubbed Tung Oil:
Straight Grip Stock: $175, plus return shipping and insurance.
Pistol-Grip Stock: $225, plus return shipping and insurance.
Shorten Barrel
Part 5:
SB (shorten barrel with necessary changes, see Services Offered page):
Guns with full-length magazine:
$200, plus return shipping and insurance cost
Guns with half-magazine:
$150, plus return shipping and insurance cost
Feeding Improvement (FI)
Part 6:
$200 plus return shipping and insurance cost
Minimize Weight, requires packages 4&5 at additional cost (MW)
Part 7:
$750 plus return shipping and insurance cost
Package: TI (Trigger Improvement)
Marlin 336, 1894, and 1895:
$50 only offered in addition to package A work;
Winchester and Winchester replicas with conventional trigger and hammer system:
$75 only offered in addition to package A work;
Winchester brand rifles with rebounding hammer system:
$250, with consultation only and only offered in addition to package A work.
Package MCC: Marlin Custom Conversion, includes
most work outlined above (as appropriate) and conversion to any of various chamberings (refer to,
What is Possible
with a Marlin, with premium barrel and a set of custom loading dies (where
necessary):
If I own the required reamer set and commercial loading dies are available:
$4500
If I do not own the required reamer set and commercial loading dies are
available:
$4800
If I own the required reamer set and commercial loading dies are not available
(includes 100 custom cases):
$5000
If I do not own the required reamer set and commercial loading dies are not
available (includes 100 custom cases):
$5300
Extra for installation of XS sights:
$100
Extra for installation of three holes along bottom of stock for apertures and
Brownells Twilight Aperture set:
$125
Extra for Installation of XS Scout Scope base:
$225
In all instances, these prices assume that you supply the basic gun, shipped to
me, as described below. Payment for custom conversions can be made as follows:
first third, with gun; second third, before I ship gun parts to Robar for
plating; final third, before I ship gun back to you. These prices include all
shipping and insurance costs, after the gun is in my hands.
Total the cost of all circled items above, then add return shipping and
insurance costs (see the following paragraph). If you cannot package the gun as
requested (see the
Services Offered page for packaging instructions), add $50 additional
special packaging charge.
When returning the finished rifle, I will insure for the following:
Hence, you can determine actual return postage
and insurance cost by adding the shipping cost that you pay to ship the gun to
me to the value of a new Marlin plus the cost of the work that I am doing, plus
the shipping and insurance costs (both ways).
Excepting custom conversions, Include with the gun a postal money order for
amount of total.
For custom conversions, include $1500 with gun. Remainder will be due in two
equal payments: first half when gun is shipped to Robar, second half before I
return gun to you.
* Endorse Postal Money Order to: M.L. McPherson
Ship rifle, by United States Postal Service, insured for value to:
|
||||||
Refer to the "Services Offered" page for packaging and shipping instructions.
Signed: ____________________ Dated: __________________
If the screen version of this order form does not print properly, click here to obtain a PDF version (if you do not have Adobe Acrobat reader installed on your computer, we also offer this link for downloading that useful program).